Pages

Comments are welcome and very much appreciated!
Showing posts with label deer. Show all posts
Showing posts with label deer. Show all posts

Saturday, December 2, 2023

Second Day December Red Rubber Day 2

Welcome to the December Limited Release Rubber Set Hop!
December 1st & 2nd the Impression Obsession Team will be sharing new projects with the December Limited Edition red rubber stamp set. You can find a list of participants on the Impression Obsession Blog daily through the event.
Two lucky customers who place an Impression Obsession order during the Limited Edition Set release week (December 1st – 8th) will be chosen and will have a very special Impression Obsession prize package added to their orders!

This card was stamped directly on microfine glittered white cardstock using double-sided tape (about 2 1/2" wide, both sides have protective sheets). 

I first put the tape onto white cardstock after removing the protective sheet, and then I  removed the protective sheet from the second side and glitter.  It helps to use a fine brush to get all excess glitter off, then burnish.
Next stamp and color or leave white.  In this sample, I added a little gray for shading the tree trucks.


Thanks for visiting today, go check out the other designers for more inspiration! (List above)

Robin

 







Friday, December 1, 2023

December Red Rubber Day 1


Welcome to the December Limited Release Rubber Set Hop!
December 1st & 2nd the Impression Obsession Team will be sharing new projects with the December Limited Edition red rubber stamp set. You can find a list of participants on the Impression Obsession Blog each day through the event.
Two lucky customers who place an Impression Obsession order during the Limited Edition Set release week (December 1st – 8th) will be chosen and will have a very special Impression Obsession prize package added to their orders!

I've done a Z-Fold card today using 2 of the images on the new December Red Rubber Set






The card closed.


Thanks for visiting today, don't forget to check out the other designers for more inspiration!!

Robin

















 

Tuesday, April 27, 2021

Happy Birthday Magnolia Gateway

Good morning!
This first card uses a very decorative new Gateway Die Called
Royal Gateway.  It is sitting on top of a Majestic Swirl Frames 
card base for this card.


Heartfelt Creations Products: 

Royal Gateway Die

Majestic Swirl Frames Die

Countryside Winter’scapes Die

Countryside Winter’scapes Stamp Set

Starry Night Decorative Die

Woodsy Winterscapes Die

Woodsy Winterscapes Stamp Set

Create a ‘scape Wilderness Die

Create a ‘scape Wilderness Stamp Set

Rich Cocoa Memento Ink.

Bamboo Leaves Memento Ink.

Metal Tip for Adhesive Bottles

Dries Clear Adhesive

Crystal Ultrafine Transparent Glitter

Other Products:

White cardstock, foam sheet, Snow Pen, Copics: E50, E51, E53, E21, E31, E33, R24, R43, RV29,

Video:

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo

Instructions: 

Card size: 5 1/4 X 6 3/4", it is about 1/2" thick.   Card is folded at the top.  See video for making shaped cards above.  Main point is to let the die (outer die of the Majestic Swirl Frames) hang over the folded edge about 1/2" so that fold isn’t cut away.  Now cut the full outer die from white again and from foam sheet.  Glue the full fronts (white and foam) together then onto card front matching sides and bottom edges.  (foam may need to rest overnight to regain its shape).  Cut the decorative die from white and glue to card front, set the card aside to work on gateway. 

Cut the outer die of Gateway from white and foam sheet (let foam rest to reshape).  Cut the decorative part of Gateway from white twice, glue both together, cut center so that it opens (it comes already mostly cut) then glue to Gateway stack.   Glue a winter scene from the decorative paper to the back of Gateway to show through opening in gate.  Cut the straight Starry Night Border Die and glue it to the bottom of the Gateway.   Now the Gateway can be glued to the card base matching bottoms for a nice appearance when the card is open on display.

Stamp the tree twice using Bamboo Leaves, dot Snow Pen on and heat to puff up.  Stamp berries twice using Rich Cocoa and stamp deer once using Rich Cocoa, die cut and color.  Pop up the trees on each side of the Gate sticking 1 berry twig behind each tree.  Glitter the card, trees and berries using Crystal Ultrafine then glue the deer on each side, on top of trees so that bottom of feet match bottom of trees.

 



My next card features the other new Gateway Die


Heartfelt Creations Products:

Palace Gateway Die

Ironworks Sentiments Die  (inside of card)

Sweet Magnolia Blooms Die

Sweet Magnolia Buds Die

Sweet Magnolia Blooms Stamp Set

Sweet Magnolia Buds Stamp Set

Calla Lily Paper Collection

3D Magnolia Shaping Mold

French Cottage ‘scapes Die  (Planter)

French Cottage’scapes Stamp Set

Cottage Summer’scapes Die (birds/nest)

Cottage Summer’scapes Stamp Set

Just for You Sentiments Stamp Set

Luxe Silver Cardstock

Deluxe Flower Shaping Paper Pack of 50-White

Rock Candy Stamen-Small

Assorted Bead Stamen-Medium

Rose Madder Archival Ink

Deep Purple Archival Ink

Fern Green Archival Ink

Leaf Green Archival Ink

Memento Tuxedo Black

Metal Tip for Adhesive Bottles

3-D Crystal Lacquer

Dries Clear Adhesive

Rajni Chawla’s Crystal Clear

Crystal Ultrafine Transparent Glitter

Other Products:

White cardstock, Acrylic Shimmer additive, foam tape, Copics: R22, R20, E53, E33, E35, B00, B01, Y21, YR24, Y21, YG63, VO1, V12

Videos:

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo

Instructions:

Card size: 5 X 6 1/2".  Fold is at the top, place die on folded cardstock so that die over-hangs the top fold by at least 1/2".  Using the outer die again, cut a full front and glue it to folded card.  Cut 2 pieces of very light decorative paper using the outer die again (1 is for the inside).  Stamp the decorative paper (1 piece) with sentiment using Deep Purple then glue onto front and the other piece inside.  Sponge the edges of card with Deep Purple.

Cut the decorative part of Gateway out of silver also cut the Happy Birthday Ironworks sentiment out of silver as well.  Glue the sentiment inside of card and the Gateway on the front (be sure to clean off any glue so that the silver stays nice and shiny).  Cut the center of Gateway at the top and bottom so that it can open.

Stamp 2 Magnolia Bud branches, the birds/nest and the planter with tree stem using black, die cut all and color.  Glue stem of bud branch onto stem of planter then cut any excess off stems.  Use pop-ups to adhere the planter and branches.  Glue the nest in branch on top then glue little birds.

Stamp Magnolias (small) using Rose Madder then die cut and sponge backs.  Stamp small leaves using Fern Green, die cut then sponge front and back.  Shape flowers and leaves in the mold.  Glue 2 blossoms together for each flower (or more if you like).  Pierce the centers and insert stamen (dyed with Deep Purple).  Glue 3 flowers and a few leaves to the bottom left corner so that gate can still open.

Glitter using Crystal Clear, flowers top and bottom, wipe glitter off of silver where it clings.  Mix shimmer with lacquer then paint the leaves.

Thanks for visiting today!

Robin


John 1  Speaking of Jesus, the Son of God

In the beginning was the Word, and the Word was with God, and the Word was God. He was in the beginning with God. All things were made through Him, and without Him nothing was made that was made. In Him was life, and the life was the light of men. And the light shines in the darkness, and the darkness did not [a]comprehend it.

14 And the Word became flesh and dwelt among us, and we beheld His glory, the glory as of the only begotten of the Father, full of grace and truth.





 

Tuesday, July 23, 2019

HC Tri-Fold Windows

Good morning!
This one was really fun, using the typical Z-Fold card.
It's fun to get a different top or side with the 
Heartfelt Creations border dies.




HC PRODUCTS USED      

Other Products:
White cardstock, pearls, Copic: E50, E51, E53, E21, R21, R24, R29, B21, B32, Y11, Y15, Y38, G14, YG67, YG23, foam sheet.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: 6 X 12”.  Score at 4” and 8” then fold and use a bone folder to get a good tight fold. Use the Delicate Border Die to cut each 4” section.  Cut 3 pieces of light blue decorative paper 3 7/8 X 6 then cut tops to match card base sections and glue to card. Cut 3 white Delicate Borders and glue one to each section matching curves cutting off excesses.   Cut 2 Starry Night half circle doilies and glue one to the back of each side. 

Cut 3 Botanic Windows, cut the center decorative part for two of them.  For the last window cut one of the sentiments from the decorative paper using the arch die from the Botanic Window. Cut a piece of foam sheet with the window die and glue foam, window and sentiment together.  Cover the top with holly and poinsettia.
Choose two scenes for the other two windows.  Cut them out with the arch part of die.  Glue foam to the frame of the windows to pop up away from the outside scene then glue scenes to the foam.  Glue each completed window to the 3 sections.

Stamp (using black), die cut and color Candles and holly.  Stamp, using black, sponge with Red and die cut poinsettias.  Shape in the 3D molds then glue 2-3 layers together for each flower.  Add Prills to the centers. Glue a candle to the window of the first 2 windows (the ones with outdoor scenes) then glue small poinsettias to each candle arrangement.  Glue holly around the tops of the windows then glue one medium size poinsettia to the first section window.

Attach pearls to windows, top outside corners of card, and bottom outside corners of card.  Randomly add glitter to the card and scenes.  Glitter all the flowers to complete. 

Now for a lovely sunset wildlife scene.  Are those wildflowers at the top? Could be since all these things are all around our house especially in the spring.



HC PRODUCTS USED      

Other Products:
Ivory cardstock, ribbon, white cardstock, foam tape, Copic Markers: YR04, Y38, Y11, Y15, RV10, RV02, B00, B02, RV55, V01, V12, V15, BV00, BV02, YG03, YG17, YG23, E53, E33, E35, E57, E42, E43, E44, C1, C3, C5

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: 6 7/8 X 4 7/8”.  Cut Ivory cardstock 9 3/4 X 6 7/8” then fold in half.  Cut an ivory Intricate Swirl Frame outside and inside scrolly die.  Cut a piece of decorative paper with a background of trees and sky.  Color the sky a more brilliant sunset color with yellow, orange and pink.  Glue the background piece to the back of Intricate frame then glue to the card.  Glue the scrolly part on top of the background.

Stamp Birch trees, critters (bunnies, squirrels, birds, deer), the rocks x 2, and flowers using black.  Stamp the posies with Deep Purple, stamp the leaves Fern Green, sponge flowers with purple, sponge leaves with Leaf Green and Purple.  Die cut flowers and leaves then shape in the molds.  Glue 2 blossoms together for each flower, pierce then insert threaded small green stamen.  Color animals, trees, rocks and flowers with Copics or favorite coloring method.  Glue the trees to each side of the frame then glue flowers and leaves at the tops of the trees. Pop up animals, rocks and flowers, double pop some making more dimension.  Glitter the flowers.

Thanks for visiting today! Blessings!
Robin

Isaiah 41:10 New King James Version (NKJV)

10 Fear not, for I am with you;
Be not dismayed, for I am your God.
I will strengthen you,
Yes, I will help you,
I will uphold you with My righteous right hand.’