Tuesday, February 25, 2020

Card size: 6 X 6”. Score middle circle of the Round Bi-Fold card in half parallel to established fold. Fold in half and glue bottom of top panel to top of middle folded panel to form an easel card. Cut 2 outer circles of the Rounded Window Die out of decorative paper for top of and inside card. Glue both panels to card. Cut 2 inner circle dies from Rounded Window Die out of white, glue together then glue to top of card. Randomly glitter card front and inside.

Stamp Teapot floral, floral spray, tea cup, and floral bouquet using black, die cut and color with Copics. Cut a Fun Foam Cup and Bouquet then glue images onto Fun Foam. Glue them on the inside of card at approximate center (this will be the easel “stop”. Glue the teapot and spray to the front of card toward the bottom of white die cuts.

Stamp the “Thank You” sentiment using Deep Purple onto white and sponge with purple. Cut another sentiment from decorative paper. Cut fish tail ends on both sentiments. Glue the “You’re Tea-rrific” sentiment to the front and glue/foam tape the “Thank you” to the inside.

Stamp roses using Magenta Hue and leaves using Fern Green, sponge on color, die cut and form in the mold (see Video). Make roses by gluing several layers together. Glitter roses. Gloss the leaves with Lacquer. Attach 3 roses to the inside below cup with leaves. Attach 2 roses on the top under floral spray.

Make 1 multi-loop sheer bow for the inside and a double loop bow for the top of card then attach with glue dots and glue (to make sure it does not come off).

My second card is a Christmas card, isn't it

elegant and different?

It's hard to photograph gold mirror type paper,

here is another photo

HC PRODUCTS USED
HCD1-7213              Elegant Pocket Accents Die
HCD1-7214               Ornate Pocket Accents Die
HCD1-7201              Ticket and Tags Die
HCPC3833                Silent Night Scroll Stamp Set
HCPC-3884               Candy Cane Cottage Stamp Set
HCPC-3881               Christmas Poinsettia & Holly Stamp Set
HCD1-7249               Christmas Poinsettia & Holly Die
HCFB1-478               3D Christmas Poinsettia Shaping Mold
HCDP1-2104             Candlelit Christmas Paper Collection
NU802                        Indian Gold Nuvo Mousse
HCGP1-488               Luxe Gold Cardstock
85-glitter                    Crystal UltrafineTransparent Glitter
PGM15015               Rajni Chawla’s Crystal Clear
352854                       Metal Tip for Adhesive
159723                       Dries Clear Adhesive
359760                       Embossing Powder-Gold
ANC804                      Heart of Gold Prills

Other Products:
Ivory cardstock, gold ribbon

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
For more tips on creating with the booklet frame dies, watch the tutorial at https://youtu.be/kJO5LdNFxgE.

Instructions:
Card size: 6 X 6 1/2”. Make card base with a 12 X 6” Ivory cardstock, fold in half and leave the die off the top of the fold so that it doesn’t cut the entire fold (see video). Cut and ivory solid piece with the longer of the Elegant Pocket Accent Die. Cut another including the insert out of Gold Luxe. Glue the solid piece and the gold together then glue to the top of the card. Cut one Ornate Pocket Die including the pie shaped piece out of Gold Luxe. Glue this piece to the card front leaving top open so that it makes a pocket. Cut 2 tag frames from Gold Luxe then 2 inside tags from the decorative ivory color paper. Glue the tags to their frames and punch a hole at the top of each (or use included die for the hole). Stamp and emboss sentiments and pine cone on each tag. Insert gold ribbon.

Stamp and emboss poinsettias and holly on ivory cardstock, die cut and shape in the mold. Layer 3-4 blossoms together for each flower brush with gold Nuvo and fill centers with gold Prills. Glitter the flowers and arrange on card bottom left.   Glitter card and tags, when glue is dry insert tags.

My third card today is another pocket card

HC PRODUCTS USED
HCD1-7211         Decorative Pocket Accents Die
HCD1-7212         Petite Pocket Accents Die
HCD1-7213         Elegant Pocket Accents Die
HCD1-7201         Tickets and Tags Die
HCFB1-2110         CallaLily Paper Collection
HCD1-7275          Calla Lily Die
HCPC-3897           Calla Lily Stamp Set
HCFB1-484           3D Calla Lilly Shaping Mold
HCS1-485             Pastel Pollen Stamens-Medium
HCD1-7227          Eyelet Diamond Die
HCD1-7226          Diamond Basics Die
HCPC-3848           Cheerful Note Sentiments Stamp Set
HCPP1-475           Deluxe Flower Shaping Paper Pack of 50-White
RACP614               Magenta Hue Archival Ink
RACP531              Vivid Chartreuse Archival Ink
RACP962               Fern Green Archival Ink
PGM15015           Rajni Chawla’s Crystal Clear
85-glitter              Crystal Ultrafine Transparent Glitter
352854                 Metal Tip for Adhesive
159723                 Dries Clear Adhesive
3D1844                 3-D Crystal Lacquer

Other Products:
Black cardstock, floral tape, ribbon, black pearls

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: 6 X 6”. 12 X 6 black cardstock folded in half for the card base. From black cut: 2 tag frames, Petite Pocket Accent narrow and wide, 2 corner, Eyelet Diamond and 1 Decorative Pocket Accent. Cut a 5 7/8 X 5 7/8 panel from bright pink decorative paper. Lay pieces out on pink so that you can see where to cut slit in pink paper to make a pocket. Draw a line with pencil, remove all pieces then cut the slit. Glue the pink paper to black card leaving pocket free.

Glue die cuts to card front the way you had them arranged so that slit of Decorative Pocket Die matches slit in paper. Cut 2 decorative paper tags then glue to black tag frames. Make the little hole enforcers from black and glue on top of holes.   Cut Diamond from bright pink decorative paper then glue to black eyelet diamond. Stamp tags with sentiments using Magenta Hue. Stamp diamond sentiment using black. Glue diamonds to card in the center below Petite Pocket die. Glitter tags and card.

Stamp Calla Lilies using Magenta Hue, sponge and leaves using Fern Green, sponge with Chartreuse.   Form flowers, insert stamen then wire 3 together. Glue leaf under last one and tape up wires to make it look more like a stem. Glitter the flowers and gloss the leaf. Glue them to the bottom of the card under pocket.
Thanks for visiting today!
Robin
One of my favorite verses from God's word.

Jeremiah 29:11-13 New King James Version (NKJV)

¹¹For I know the thoughts that I think toward you, says the Lord, thoughts of peace and not of evil, to give you a future and a hope. ¹²Then you will call upon Me and go and pray to Me, and I will listen to you. ¹³And you will seek Me and find Me, when you search for Me with all your heart.

Wednesday, February 19, 2020

HC Tea Time Dispenser

Good morning!

Yes, what better for a tea lover than a pretty tea dispenser?

Below in the instruction area I have included the template

for this beautiful dispenser.

HC PRODUCTS USED

HCD1-7287 My Cup of Tea Die

HCD1-7288 Elegant Teapot & Florals Die

HCPC-3904 My Cup of Tea Stamp Set

HCPC-3905 Elegant Teapot & Florals Stamp Set

HCDP1-2112 Tea Time Paper Collection

HCFB1-462 Rose Shaping Mold

HCD1-7155 Circle Basics Large Die

HCD1-7154 Eyelet Circle & Basics Small Die

HCD1-7110 Classic Rose Die

HCPC-3752 Classic Rose Stamp Set

RACP614 Magenta Hue Archival Ink

TMPS900 Tuxedo Black Memento Ink

RACP436 Leaf Green Archival Ink

RACP962 Fern Green Archival Ink

PGM15015 Rajni Chawla’s Crystal Clear

85-glitter Crystal Ultrafine Transparent Glitter

352854 Metal Tip for Adhesive

159723 Dries Clear Adhesive

3D1844 3-D Crystal Lacquer

Other Products:

White cardstock, pink cardstock, beads, ribbon, tea bags, Copics: RV00, RV10, RV02, YG11, YG05, BV00, BV01, C1, C3,

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE

Instructions:

Size: 2 3/4 X 3 1/4 X 5 1/8”. Template for dispenser found here: https://www.splitcoaststampers.com/resources/tutorials/teabagdispenserbox/

Make box according to tutorial/template instructions from white. Use decorative paper and pink cardstock to decoration panels, cut an oval tag from decorative paper and stamp it with “Tea Time” using black. When all paper and cardstock is glued to the dispenser then wrap a pink ribbon around where papers meet in the middle, secure in front of dispenser.

Cut 1 pink round die and one from decorative paper and foam tape over ribbon in front. Stamp the smaller teapot, die cut and color with Copics then glue it to the circles. Stamp the small teacups twice, die cut and color with Copics. Add a ribbon around base of dispenser then glue small teacups over the ribbon on 3 sides.

Stamp the roses using Magenta Hue, sponge, die cut and form in mold (see video). Stamp leaves with Fern Green, sponge with Leaf Green and Magenta, die cut and form. Layer rose petals together to make 1 rose.

Make the hanging tag by tying floss to tag and adding a charm then beads. Make a large dot of strong adhesive on the dispenser top, add the floss to it so that tag hangs down side then add the leaves and a pink rose on top. Glitter the rose. Randomly glitter the dispenser. Fill the dispenser with tea.

My second card is perfect for mom!

HC PRODUCTS USED
HCFB1-464             3D Floral Basic Shaping Mold
HCD1-7140             Large Classic Petunia Die
HCD1-7139             Small Classic Petunia Die
HCPC-3786             Large Classic Petunia Stamp Set
HCPC-3785             Small Classic Petunia Stamp Set
HCFB1-467              3D Leafy Accents Shaping Mold
HCPC-3835             Leafy Accents Stamp Set
HCD1-7193             Leafy Accents Die
HCD2-7191             Intricate Swirl Frames Die
HCPC-3846             Thank you Sentiments Stamp Set
HCDP1-2106           Wild Aster Paper Collection
HCPP1-475              Deluxe Flower Shaping Paper Pack of 50-White
HCGP1-488             Luxe Gold Cardstock
359760                    Gold Embossing Powder
RACP524                 Vibrant Fuchsia Archival Ink
352854                    Metal Tip for Adhesive
159723                    Dries Clear Adhesive
3D1844                    3-D Crystal Lacquer
85 glitter                   Crystal UltrafineTransparent Glitter
PGM15015              Rajni Chawla’s Crystal Clear
Racp436                  Leaf Green Archival Ink
RACP962                 Fern Green Archival Ink
HCS1-458-3            Bright Bead Stamen-medium
HCS1-458-1             Bright Pearl Stamen-Small

Other Products:
White cardstock, foam tape, alcohol ink (to dye small stamen)

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: 5 X 7”. Cut a magenta color decorative paper to 4 3/4 X 6 3/4" then glue to 5 X 7 card base. Cut a gold Intricate Swirl Frame. Cut the center of frame from white then stamp and emboss with gold, Happy Mother’s Day. Glue gold frame to magenta paper then glue sentiment to the center.

Stamp large and small petunias using Vibrant Fuchsia, sponge with the same, die cut sponge the backs then shape in the mold (see video) Squeeze petals together into tight pleats while moist. Allow to dry completely. Layer several layers together, use at least 2 of the same size before progressively getting smaller. When you get to the smaller insides of flower just start using 1 of each. Flower will be very full. Pierce the centers then insert stamen, small first then wired medium (dye small stamen with alcohol ink to match beaded stamen).

Stamp leaves using Fern Green, sponge with Leaf Green and fuchsia, die cut then Shape in mold (see video). Gloss leaves with Lacquer. Glitter all flowers.

Arrange leaves and flowers to left bottom corner and top right corner. Randomly glitter card front.

My Third Card is perfect for any occasion

You can put any sentiment on the tag.

HC PRODUCTS USED

HCD1-7245 Adorn It Accents Die

HCD1-7202 Album Tags and Accents Die

HCD1-7257 Wild Aster Die

HCPC-3887 Wild Aster Stamp Set

HCPC-3888 Wild Aster Spray Stamp Set

HCD1-7258 Wild Aster Spray Die

HCDP1-2106 Wild Aster Paper Collection

HCPP1-475 Deluxe Flower Shaping Paper Pack of 50-White

ANC818 Go Man Go Prills

RACP436 Leaf Green Archival Ink

RACP962 Fern Green Archival Ink

RACP430 Deep Purple Archival Ink

RACP670 Tiger Lily Archival Ink

PGM15015 Rajni Chawla’s Crystal Clear

85-glitter Crystal Ultrafine Transparent Glitter

352854 Metal Tip for Adhesive

159723 Dries Clear Adhesive

3D1844 3-D Crystal Lacquer

Other Products:

White cardstock, ribbon, pearls,

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE

Instructions:

Card size: 6 1/4 X 7”. Cut 1 white panel 6 1/4 X 7 and 1 white panel 6 3/4 X 7, score at 1/2" and glue it to the other panel to make a 6 1/4 X 7” card. Cut purple decorative paper 5 7/8 X 6 3/4". Cut 2 white Adorn it Accents Die cuts using the zig-zag slit. Place one die at the bottom and draw a line where the slit will be with pencil then cut the paper on the line with zig-zag slit die. Glue the paper onto the card leaving pocket open. Glue both Adorn it Accent die cuts to card, make sure bottom die cut zig-zags match to paper.

Cut 1 white tag frame and 1 decorative paper tag, glue them together, punch hole at top. Glitter tag and card. Add ribbon to the tag.

Stamp Asters and Aster Spray using Deep Purple, sponge, die cut and form. Stamp leaves using Fern Green, sponge with Leaf Green and Deep Purple. Glue 4 layers for large flowers and 3 for small flowers. Add Prills to the centers and glitter flowers.

Arrange Asters, leaves and Aster Sprays along bottom and left of tag. Glue a large pearl to each corner.

Thanks for visiting today!
Robin

Can anything ever separate us from Christ’s love? Does it mean he no longer loves us if we have trouble or calamity, or are persecuted, or hungry, or destitute, or in danger, or threatened with death? No, despite all these things, overwhelming victory is ours through Christ, who loved us.

Romans 8:35,37 NLT

Tuesday, February 11, 2020

HC Tea Time Debut -You Are So Beau-Tea-Ful To Me

Good morning!

I just love tea pots and cups probably because of my mother.

She had a collection of not only beautiful floral tea cups

that she kept in a glass doored cabinet but she also

had quite a collection of unusual tea sets (the teapot, creamer and sugar). I used to love just looking at them.

She used to take me down the street to a neighbor's house who would serve us tea in fancy cups and then they would talk while I played with our neighbor's button collection tin.

I loved the smell of my neighbor's house, it smelled

like a tea house.

I might just tell you, my mom was from Texas where

they drink a lot of sweet tea. My mom gave me sweet tea

in my baby bottle. Tea has been a "thing"

for me ever since. I do not drink it with sugar anymore

thank goodness or I'd be as big as a house but I still LOVE

my tea hot or iced.

I love baby roses or rose buds, they are my favorite!

HC PRODUCTS USED

HCD1-7286 Special Teapot Die

HCPC-3903 Special Teapot Stamp Set

HCD1-7193 Leafy Accents Die

HCPC-3835 Leafy Accents Stamp Set

HCFB1-467 3D Leafy Accents Shaping Mold

HCD1-7110 Classic Rose Die

HCPC-3752 Classic Rose Stamp Set

HCFB1-462 3D Rose Shaping Mold

WT6106 Frilly Flourish Swirl-White Pearls

HCD2-7192 Eyelet Lace Frames Die

HCS1-458-3 Bright Bead Stamens-Medium

RACP632 Buttercup Archival Ink

RACP638 Rose Madder Archival Ink

RACP436 Leaf Green Archival Ink

RACP962 Fern Green Archival Ink

PGM15015 Rajni Chawla’s Crystal Clear

85-glitter Crystal Ultrafine Transparent Glitter

352854 Metal Tip for Adhesive

159723 Dries Clear Adhesive

3D1844 3-D Crystal Lacquer

Other Products:

Fun Foam, white cardstock, yellow cardstock

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE

Instructions:

Card size: 5 X 7”. 10 X 7 white cardstock folded in half. Cut yellow cardstock 4 3/4 X 6 3/4" then glue to card base. Cut 1 white Eyelet Lace Frame then glue to yellow. Adhere the swirly pearls to the Eyelet Lace Frame

Stamp teapot twice, die cut 1 complete and die cut the other in 2 places, the lid and the label. Die cut the teapot and the lid from Fun Foam. Color teapot, lid and label. Stamp the label with the sentiment.

Stamp the leaves using Fern Green, sponge with Leaf Green, die cut and form (see video). Stamp roses using Rose Madder, sponge with Buttercup and Rose Madder, form in mold. Punch small Sepal (sponge with Leaf Green) for the bottoms of roses. When making rose buds start with forming around stamen, add 2 or 3 more layers and finally add sepal at the bottom, let dry, sponge wires with green. Gloss the leaves, glitter the flowers.

Glue colored teapot to foam, glue lid to foam. Glue the teapot to the card leaving left foot free for now. Glue the lid to the teapot. Foam tape the label to the teapot (It needed to be a little less in height). Glue the leaves to the bottom of card and under the left foot of teapot then secure foot to card. Add rose buds. Glitter the teapot and card.

Thank you for visiting today!

Robin

Proverbs 21:21 New King James Version (NKJV)

²¹He who follows righteousness and mercy
Finds life, righteousness, and honor.

InkMagination

Pages

Tuesday, February 25, 2020

HC Tea Time Easel

Jeremiah 29:11-13 New King James Version (NKJV)

Wednesday, February 19, 2020

HC Tea Time Dispenser

Tuesday, February 11, 2020

HC Tea Time Debut -You Are So Beau-Tea-Ful To Me

Proverbs 21:21 New King James Version (NKJV)