Good morning!
I've used my ovals for this card with foam sheet between
each layer for more dimension.
Some pieces are in the center layer, some the first
and some on top.
I used a sand embossing powder around my heart
and randomly on the sand.
Can't you just imagine that couple right outside our
scope of vision?
HC PRODUCTS USED
HCD1-7264 SeaBreeze Harbor DieHCD1-7265 Sandand Sunset Die
HCPC-3890 SeaBreeze Harbor Stamp Set
HCPC-3892 Sandand Sunsets Stamp Set
HCDP1-2107 SeaBreeze Paper Collection
HCPC-3804 HeartfeltLove Sentiments Stamp Set
HCD1-7162 EyeletHearts Die
HCD1-7157 Eyelet Oval & Basics Large
HCD1-7156 Eyelet Oval & Basics Small
HCD2-7189 Eyelet Rectangle & Basics Die
RINK44444 Ranger Texture Paste Opaque
TSMP804 Desert Sand Memento Ink
TSMP900 Tuxedo Black Memento Ink
PGM15015 RajniChawla’s Crystal Clear
352854 Metal Tip for Adhesive
159723 Dries Clear Adhesive
Other Products:
White cardstock, Stickles, Hero Arts Sand Embossing
Powder, Foam sheet, foam tape, London Gray Memento Ink, black cardstock, Copic
Markers: E53, E33, E35, E59, C2, C3, W2, W3, W5, E81, E43, YG03, YG17, B21,
B24, Y11, Y15, Y38, R81, R17, R29, E42.
Instructions:
Card size: 5 1/2 X 7 1/2". Cut 2 piece of cardstock and 2 pieces of
decorative paper 5 1/2 X 7 1/2", use ovals to cut out centers (One 2
1/4" and the other 2”) Cut 2 pieces of foam sheet 5 X 7”, cut ovals
out of center to match cardstock. Cut a
card 11 X 7 ½” then fold in half. Cut
black cardstock 5 1/2 X 7 1/2" Use rectangle die to cut out center leaving
a frame. Cut a piece of white 5 1/2 X 7
1/2" and use a craft knife to cut out center 1/8” smaller a around than
the black frame to leave a small white inner edge to frame, cover the back of
double frame with foam tape and set aside.
Cut a piece of decorative paper 5 X 7 for white card base then glue it
to the center of the card. Cut a piece
of blue to use as water and glue it down.
Cut 2 more strips of blue for top 2 layers to match horizons on each
layer and glue them down after cutting away any portion that covers oval
opening. Cut tan decorative paper for
the sand and tear top edge for top layer.
Stamp I Love You onto tan paper and die cut with heart die then glue to
sand on right side. Apply embossing
fluid around heart then use sand embossing powder to edge heart, heat to
emboss. Sprinkle sand embossing powder randomly over sand after
stippling on some embossing fluid then heat. Apply texture paste and glitter to the torn
edge of the sand, glue to bottom of top layer.
Glue foam sheet, cardstock and decorative paper together for each layer
and set aside.
Stamp rowboat
twice, fence, large lighthouse scene, cloud, birds, sunset and extra rocks for
lighthouse scene, die cut and then color all pieces. On card base, glue sunset down matching
horizon lines then glue one layer with foam sheet down (the one with smallest
oval first). Glue the clouds and part of
the lighthouse scene (cut between lighthouse and house). Glue next layer with
foam down lifting lighthouse to go over onto top layer (base of lighthouse is
on layer below). Glue the house section
on matching grass line and then pop up extra rocks (use double foam tape on
left section of rocks and glue on house section on rocks. Apply texture paste to rowboat scene, on the
sand, let dry then pop the other rowboat on top of it. Glue set to top layer matching sand lines. Use right end of fence on left side of card,
pop up. Use Stickles on all the water. Stipple glue on sand and sprinkle glitter
onto it. Glue birds to the sky. Now adhere frame to the top of card.
For my second card I used an idea I saw on our Heartfelt Creations Facebook page by Stephanie Beck. She used this pattern for a beautiful card.
HC PRODUCTS USED
Other Products:
White cardstock, Stickles-Crystal, foam tape, pearls, Copic
Markers: BG72, BG11, C2, C3 , BV20, YG03, YG17, R11, R17, R29, E53, E33, E35, E08,
E51, E42, E43, W3, W5, Y24, Y21
For more tips on creating with the flower shaping molds,
watch the tutorial at https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: closed-6 X 4, Open 6 X 12. Follow template pattern for card base. Cut paper panels from decorative paper-starting
at left 3 7/8 X 5 7/8”, 7/8 X 5 7/8”, 1 3/8 X 3 7/8 (X 4 pieces), 7/8 X 5 7/8”
all vertical. Horizontal pieces: 7/8 X 2
7/8” (X4 pieces). Cut from 1 piece
of 5 7/8 X 12” decorative paper. Glue all panel pieces on to corresponding
panels on base.
Stamp
using black, birds X 2, shells, sand pipers X 2, sailboat, Rope frame, fences X
2, leaves Using Fern Green, blossoms using Yellow, orange, blue, and pink and
sponge with the same colors. Die cut all
pieces then color. Stamp sentiment on another piece of the same
paper (from the other 6 X 12 piece left over).
Die cut with the circle die, die cut a white mat with a little larger
circle. Cut out the lifesaver, post and
anchor to use, discard rope frame. Shape the blossoms in the Mold.
Pop up fence pieces
to each side of the card. Pop up birds
onto the sky areas. Pop up the
sailboat Pop up sandpipers and shells
(cut shells and sandpipers apart and spread out over card). Glue blossoms and leaves to left and right
bottom sides. Add glue to the centers of
blossoms and sprinkle on Prills. Glue circle
sentiment and mat to the top left side.
Stipple
glue onto sand and flowers then sprinkle on glitter. Add pearls around shells. Add Stickles to water.
If desired
you can glue other sunset paper to back of card just to finish it off.
The template for this card is Template for special Z-fold
5 comments:
Two gorgeous cards!
BOTH of your cards are GORGEOUS, Robin!!! ;)<3
Amazing, Amazing, Amazing! I think that says it ALL!
What amazing cards. I so am going to try to recreate the second card. Panoramic design. Thank you for the directions
Good blog poost
Post a Comment