Pages

Comments are welcome and very much appreciated!

Tuesday, January 28, 2020

HC On Your Special Day

Good morning!
These sweet swans are one of my favorites
right now.  Love them for anniversaries, weddings, or Valentines.

HC PRODUCTS USED      
HCD1-7276      Feathery Swan Die
HCPC-3898      Feathery Swan Stamp Set
HCD1-7280      Cottage Window & Hydrangea Die
HCPC-3902       Cottage Window & Hydrangea Stamp Set
HCDP1-2111     Cottage Garden Paper Collection
HCD2-7192      Eyelet Lace Frames Die
HCD1-7162      Eyelet Hearts Die
HCD1-7204      Arrows and Banner Die
HCPC-3847       Celebrate Love Sentiments Stamp Set
TSMP900          Tuxedo Black Memento Ink
PGM15015        RajniChawla’s Crystal Clear
352854             Metal Tip for Adhesive
159723             Dries Clear Adhesive
242174             Vellum Paper-10 Sheets

Other Products:
White cardstock, silver cardstock, foam tape, Copic Markers: B21, B24, RV11, Y21, YR24, G82, G21, BG01, pearls, silver leaf pen, silver embossing powder, VersaMark Ink.

Instructions:
Card size: 5 X 7”.  Make white card 10 X 7” folded in half then edge with Silver Leaf Pen.  Cut the Eyelet Lace frame from silver and from blue decorative paper.  Glue them together slightly off-set then glue to card base. Cut the center of the Eyelet frame from a decorative panel that has flowers on it then glue to the center of the frame on card.

Cut the largest Eyelet Heart from Silver and from white.  Use the next side down to cut out the centers of the hearts to make just a frame for each.  Glue them together slightly off-set then add foam tape to the back of the heart frames.   Adhere the heart to the center of frame.

Stamp Hydrangea borders top and bottom using black, die cut and color then cut apart as needed to arrange under and to each side of the heart at the bottom.  Stamp the Swans using black, die cut and color.  I shaded these swans with the blue colors.  Foam tape the swans to the heart.

Stamp the sentiment using VersaMark on vellum then emboss with silver and die cut with the banner, making one end shorter to fit sentiment (do this by moving the die over, on top of what has been cut to cut the end closer to the sentiment).   Weaver it between the swans heads and the heart then add glue to where the letters will hide it. 

Add pearls to the Eyelet Lace Frame and randomly glitter, make sure to glitter the flowers.


My second card is made with the new card bases
and round dies from Black Friday.




HC PRODUCTS USED      
HCD1-7110             Classic Rose Die
HCPC-3752             Classic Rose Stamp Set
HCFB1-462              3D Rose Shaping Mold
HCDP1-2106          Wild Aster Paper Collection
HCD1-7274             Rounded Lattice Window Die
HCD1-7273             Rounded Eyelet Window Die
HCFB1-467              3D Leafy Accents Shaping Mold
HCPC-3835             Leafy Accents Stamp Set
HCD1-7193             Leafy Accents Die
HCD1-7258             Wild Aster Spray Die
HCPC-3888              Wild Aster Spray Stamp Set
HCD1-7214              Ornate Pocket Accents Die
HCD1-7170              Lush Lilac Die
HCCB1-482              Swing Fold Card-White
85 glitter                   Crystal UltrafineTransparent Glitter
PGM15015              Rajni Chawla’s Crystal Clear
Racp436                  Leaf Green Archival Ink
RACP962                 Fern Green Archival Ink
RACP494                 Majestic Violet Archival Ink
RACP430                  Deep Purple Archival Ink                 
352854                    Metal Tip for Adhesive
159723                    Dries Clear Adhesive
3D1844                    3-D Crystal Lacquer
ANC803                   Minnis Pearls Prills
ANC804                   Heart of Gold Prills
HCS1-457-3            Pastel Bead Stamens-Medium

Other Products:
White cardstock, sheer lavender ribbon, green cardstock (for sepals)

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE

Instructions:
Card size: 6 X 6”.  Glue the 2 square panels together as only one is needed.  Cut a lavender square to fit the back square inside panel and glue to inside card.  Cut a round panel for the front of card from decorative paper and cut a thin sentiment from decorative paper.  

Cut 4 white corners from the Ornate Pocket Accents and glue to each of the 4 inside corners. There is space in the center for writing a personal message.  Cut a white circle with the Rounded Eyelet Window Die and use the 2 inside dies from the Rounded Lattice Window Die. Also use the straight line hole die from Eyelet Window Die in the center between the 2 halves.  Lace the holes with sheer ribbon (leave a little poof of ribbon between holes).  Once ribbon is threaded glue the white die cut to the purple decorative circle front.  Make a multi-loop bow for the right side and attach to card.

Stamp roses using Deep Purple,  sponge with Majestic Violet, die cut and form (see video).  When making buds, pierce the center of 2 small rose petals and insert a lavender beaded stamen then form around stamen.  Leave the wire as a stem (you can sponge green on the wire after).  Stamp leave using Fern Green, sponge with Leaf Green and Violet, die cut and form in Shaping mold (see video).  Stamp Wild Aster Spray using Deep Purple, sponge and die cut then dot with glue and sprinkle with white Prills. 

Arrange roses, leaves, sprays and buds around left side of the Eyelet Circle front.  Glitter roses with Crystal Clear and randomly glitter card with Ultrafine Transparent.  Curl sentiment and glue toward bottom of card front at an angle.



My third card today is also made with the new round
dies and round card base.
HC PRODUCTS USED      
HCD1-7257             Wild Aster Die
HCPC- 3887             Wild Aster Stamp Set
HCDP1-2106          Wild Aster Paper Collection
HCD1-7273             Rounded Eyelet Window Die
HCD1-7272             Rounded Sunlight Window Die
HCD1-7263              Swirly Accent Spray Die
HCFB1-467              3D Leafy Accents Shaping Mold
HCPC-3835             Leafy Accents Stamp Set
HCD1-7193             Leafy Accents Die
HCD1-7215             Floral Fashionista Die
HCPC-3855              Floral Fashionista Stamp Set
HCST1-401               Deluxe Flower Shaping Kit
HCFB1-471               3D Petite Florals Shaping Mold
HCD1-7170              Lush Lilac Die
HCPC-3816              Lush Lilac Stamp Set
HCPP1-475              Deluxe Flower Shaping Paper Pack of 50-White
18002                        Rajni Chawla’s VellumFlowerite
HCCB1-481              6 X 6 Round Bi-Fold Card-White
85 glitter                   Crystal UltrafineTransparent Glitter
PGM15015              Rajni Chawla’s Crystal Clear
Racp436                  Leaf Green Archival Ink
RACP962                 Fern Green Archival Ink
RACP632                 Buttercup Archival Ink
RACP494                  Majestic Violet Archival Ink                 
352854                    Metal Tip for Adhesive
159723                    Dries Clear Adhesive
3D1844                    3-D Crystal Lacquer
EP100                        Opaque EmbossingPowder-White
ANC818                   Go Man Go Prills
HCS1-460                Bridal Bouquet Stamen-Small
HCS1-459-3            Assorted Bead Stamen-Medium

Other Products:
White cardstock, foam tape, Red violet cardstock, Fiber/cord, VersaMark

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
Instructions:
Card size:6 X 6”.  Glue the back 2 round panels together.  Cut the Rounded Eyelet Window die with  the outside Eyelet circle and inside parts at the same time from red-violet cardstock.  Cut a round panel from decorative paper using the outside only of the Rounded Sunlight Window Die.  Also cut the Swirly Accents Spray smaller die, outside only from decorative paper to match circle and from white cardstock then cut the inside only from red-violet cardstock to match circle eyelet,  (This extra piece is to stabilize the card for standing display).  Glue The decorative paper circle to front of card.  Glue the decorative paper stand to white cardstock matching edges.  Glue the decorative Eyelet Circle to card front after weaving fiber/cord through holes, glue the decorative Swirly Accents to the stand then glue the stand to the card making sure it is at the same level as the round card bottom. (you don’t need one in the back but if you prefer, follow same routine for a back stand and glue to card).

Stamp leaves using Fern Green, sponge with Leaf Green, die cut and form in Shaping Mold (see video). Coat with Gloss.  Arrange leaves around bottom, right side and top of circle card front.

Stamp Wild Asters and Petite Florals (Fashionista) using Majestic Violet, sponge die cut and form using Shaping Mold (see video) for the Petite Florals and tools for the Asters.  Stamp Petite Florals using Buttercup, sponge, die cut and form.  Stamp Lush Lilac Using VersaMark, emboss with White Powder then color the backs with Violet. 

For the Asters, layer 2 or more then fill with Prills.  Petite Florals: Pierce centers of the yellow then insert white stamen.  Petite Florals violet: layer 2 together then fill with Prills.  Vellum Lilac: Pierce centers then insert white beaded stamen, leave stems white.

Make a multi-loop bow with the cord and glue it to the right side.  Glitter all flowers now arrange  flowers on top of the leaves.  Randomly glitter card front. Cut a narrow sentiment from decorative paper, curl then glue to the card above bottom leaves and flowers.

Thank you for visiting today!
Robin

John 4:24 New King James Version (NKJV)

24 God is Spirit, and those who worship Him must worship in spirit and truth.”


2 comments:

Jan's Paper Flowers said...

OMG...three absolutely gorgeous projects Robin! Your creativity leaves me breathless!

Patricia Manhire said...

Two beautiful cards - love your roses!!