Good morning!
I love these new flowers and also these new beautiful dies!!
And the best part, I can easily use my favorite colors!!
HC PRODUCTS USED
HCD1-7278 Cottage Garden Hydrangea Die
HCD1-7279 Fresh Cut Hydrangea Die
HCPC-3900 Cottage Garden Hydrangea Stamp Set
HCPC-3901 Fresh Cut Hydrangea Stamp Set
HCDP1-2111 CottageGarden Paper Collection
HCFB1-489 3DHydrangea Shaping Mold
HCCB1-482 6 X6” Swing Fold Card-White
HCD1-7273 Rounded Eyelet Window Die
HCD1-7276 Feathery Swan Lake Die
HCPC-3898 Feathery Swan Stamp Set
HCD1-7202 Album Tags and Accents Die
HCD1-7154 Eyelet Circle & Basics Small Die
HCPC-3790 ClassicWedding Wishes Stamp Set
HCPP1-475 Deluxe Flower Shaping Paper Pack-50-White
RACP430 Deep Purple Archival Ink
RACP412 Forget-Me-Not Archival Ink
TSMP900 Tuxedo Black Memento Ink
TSMP701 Cottage Ivy Memento Ink
PGM15015 RajniChawla’s Crystal Clear Glitter
85-glitter Crystal Ultrafine Transparent Glitter
NU662 CrushedGrape Nuvo Crystal Drops
352854 Metal Tip for Adhesive
159723 Dries Clear Adhesive
Other Products:
White cardstock, lavender cardstock, silk ribbon, Foam
Tape, Copic Markers: BV00, RV00, YGO3, YG23, BG11, BV13, Y21, YR31
For more tips on creating with the flower shaping molds,
watch the tutorial at
https://youtu.be/FSdPL7nXvQE
Instructions:
Card Size: 6 X 6”.
Cut one of the square panels off at the end. Cut a 6 X 6 panel from the
decorative paper to fit inside panel, cut it down to 5 7/8 X 5 7/8 then glue it
to the inside panel.
Add a bit of BG11
to the flowers on the paper.
Pick a
decorative paper to match for the front of the card then cut it with the eyelet
circle of the Eyelet Window die then cut off the little eyelets around the edge
and cut in half and glue it to the top of the circle leaving about 1/4” border.
Cut a lavender Eyelet Window Circle with the
inside die in place (the more open die) then run the die cut through again with
the same inside die plus the straight line die with holes.
Thread the holes with ribbon and secure both
ends.
Use the inside die also on the
bottom half of the card circle front.
Glue the lavender die cut circle to the card front matching scallops and
all edges at the bottom.
Cut another
Eyelet Window die from white and only use the inside part of the die at the
bottom then glue it to the inside of the front of card matching all edges (This
just gives a bit more stability and a nice finish inside as well).
Stamp swans
and small hydrangea using Tuxedo Black, die cut and color. Stamp Sentiment using Deep Purple onto
matching decorative paper then die cut with Album Tags and Accents. Die cut the eyelet frame for the sentiment
out of white. Glue it to the top of the
card inside panel. Glue the swans to the
bottom sticking the small hydrangea in under swans on both sides using a little
foam tape under the hydrangea flower balls. Glitter the inside.
Stamp the large hydrangea and 2 sets each of the blossoms
using Forget Me Not on the flower and blossoms and using Cottage Ivy on the
stem and leaves.
Sponge the flower ball
and blossoms with Deep Purple and Forget Me Not, color the leaves with Copics.
Stamp the Flower ball 2 more times and cut with circle die in two smaller sizes
(than the flower ball). Sponge with color then add foam tape to the bottom of
each circle and stack onto flower ball with smallest circle on top.
Form blossoms in the mold (see video) then
glue to the flower ball until completely covered.
Glitter flower then squeeze a little purple
Nuvo into the center of each blossom.
To
get a flower with more curve for the round front I cut the stem off, glued the
flower head to the top of the circle toward the left then reattach he stem so
that it can curve, push leaves where you want them and secure with glue.
Tie a multi-looped bow with the ribbon and
glue to the stem area.
Glitter the front
of card!
My second card today is a
shaped card with roses.
HC PRODUCTS USED
HCD1-7110 Classic Rose Die
HCPC-3752 Classic Rose Stamp Set
HCFB1-462 3D Rose Shaping Mold
HCDP1-2109 Window Scene Paper Collection
HCD1-756 Eyelet Oval and Basics Small Dies
HCD1-757 Eyelet Oval and Basics Large Die
HCFB1-467 3D Leafy Accents Shaping Mold
HCPC-3835 Leafy Accents Stamp Set
HCD1-7193 Leafy Accents Die
HCPC-3815 Words of Comfort Stamp Set
HCD1-7227 Eyelet Diamond Die
HCD1-7258 Wild Aster Spray Die
HCPC-3888 Wild Aster Spray Stamp Set
HCD1-7263 Swirly Accent Spray Die
HCD1-7170 Lush Lilac Die
85 glitter Crystal UltrafineTransparent Glitter
PGM15015 Rajni Chawla’s Crystal Clear
Racp436 Leaf Green Archival Ink
RACP962 Fern Green Archival Ink
RACP632 Buttercup Archival Ink
RACP638 Rose Madder Archival Ink
352854 Metal Tip for Adhesive
159723 Dries Clear Adhesive
3D1844 3-D Crystal Lacquer
ANC803 Minnis Pearls Prills
Other Products:
White cardstock, Foam tape, green cardstock (for sepals).
For more tips on creating with the flower shaping molds,
watch the tutorial at
https://youtu.be/FSdPL7nXvQE
For tips on shaped cards:
https://www.heartfeltcreations.us/gallery/blossoms-shaped-card
Instructions:
Card size: 6 1/8 X 6 1/2".
Fold
12 X
6 3/4" heavy weight white
cardstock in half Then cut each side with the outside die from Swirly Accents
Spray Die set leaving the top 1/2-3/4” uncut (see video for shaped cards).
Cut another piece of white cardstock to be the
full front of card.
Place card onto
decorative paper and trace around cut edges to make sure you cut it just like
the card.
Cut the paper for front then
glue it to the card front, glue the card front to card base making sure edges
match. Cut 2 white Swirly Accents spray die cuts then glue to each side of card
front.
Cut 1 large
Eyelet Diamond from white, pop it up in the center of card lengthwise. Stamp sentiment using Rose Madder on white
then die cut with oval die to fit. Die
cut the mat with oval from decorative paper and glue together then glue them
onto the diamond popping up the ends to make level with the diamond.
Stamp (using Buttercup), sponge, die cut and
mold roses (see video). Hit tops of each
petal with Rose Madder. Stamp (using
Fern Green), sponge (with Leaf green, buttercup and Rose Madder), die cut and
form leaves (3D shaping mold, see video).
Die cut Lush Lilac blossoms to use for Sepals (especially on small roses
and buds).
Stamp, sponge (using Buttercup) and die cut the spray
from Wild Asters then put dots of glue on it and sprinkle with white
Prills. Arrange all flowers and leaves
around the left side of sentiment oval.
Glitter
flowers with Crystal Clear and randomly glitter card with Ultrafine
Transparent. Gloss leaves with 3-D
Crystal Lacquer (use a paint brush to get the leaf well coated).
My third card is another shaped card but
this time with the Oakberry Lane Blossoms
HC PRODUCTS USED
HCD1-7200 Oakberry Lane Blossoms Die
HCPC-3842 Oakberry Lane Blossoms Stamp Set
HCFB1-469 3D Blossoms Shaping Mold
HCDP1-2106 Wild Aster Paper Collection
HCFB1-467 3D Leafy Accents Shaping Mold
HCPC-3835 Leafy Accents Stamp Set
HCD1-7193 Leafy Accents Die
HCPC-3848 Cheerful Note Sentiments Stamp Set
HCD1-7258 Wild Aster Spray Die
HCPC-3888 Wild Aster Spray Stamp Set
HCD1-7263 Swirly Accent Spray Die
HCD1-7170 Lush Lilac Die
85 glitter Crystal UltrafineTransparent Glitter
PGM15015 Rajni Chawla’s Crystal Clear
Racp436 Leaf Green Archival Ink
RACP962 Fern Green Archival Ink
RACP632 Buttercup Archival Ink
RACP638 Rose Madder Archival Ink
352854 Metal Tip for Adhesive
159723 Dries Clear Adhesive
3D1844 3-D Crystal Lacquer
ANC803 Minnis Pearls Prills
HCS1-458-2 Bright Pearl Stamen-Medium
HCS1-458-1 Bright Pearl Stamen-Small
Other Products:
White cardstock, foam tape
For more tips on creating with the flower shaping molds,
watch the tutorial at
https://youtu.be/FSdPL7nXvQE
For tips on shaped cards:
https://www.heartfeltcreations.us/gallery/blossoms-shaped-card
Instructions:
Card size: 6 X 6”.
Cut the top of folded 12 X 6 cardstock, leaving top 3/4" of die off
the top so that it doesn’t cut fold (see video).
Cut another full front from decorative paper then
glue to front matching edges.
Use the
bottom of Swirly Accent Spray die to cut bottom of card.
Cut The decorate inside of the Swirly Accent
Die from white X 2.
Glue 1 to the top
and 1 to the bottom.
Stamp
sentiment using Rose Madder (curve it slightly on the acrylic block) then cut
top and bottom with the smaller Swirl Accent Spray Die. Edge the die cut sentiment with Rose
Madder. Stamp Oakberry Lane Blossoms
using Rose Madder, sponge with Buttercup and Rose Madder, die cut and form in
Shaping mold (see video). Layer together,
pierce in the center then insert stamen.
Stamp Wild Aster Spray using Buttercup,
sponge, die cut then dot with glue and sprinkle on white Prills.
Stamp leaves using Fern Green, sponge with Leaf Green and
Rose Madder, die cut and form in Shaping Mold.
Arrange leaves in an arch over bottom white Swirly die cut.
Add Aster Sprays to 2 ends.
Glue flowers on top of some of the leaves.
Gloss leaves with 3-D Lacquer.
Glitter flowers and card.
Glue sentiment above flowers and leaves.
Thanks for visiting today!
Robin
Galatians 3:26-28 New King James Version (NKJV)
Sons and Heirs
26 For you are all sons of God through faith in Christ Jesus. 27 For as many of you as were baptized into Christ have put on Christ. 28 There is neither Jew nor Greek, there is neither slave nor free, there is neither male nor female; for you are all one in Christ Jesus.
2 comments:
Three beautiful cards!!
Triple Gorgeousness! Wow, Robin, these are all spectacular. You're so incredibly talented.
Post a Comment