Good morning crafters!
Here are some of the amazing new dies from Heartfelt Creations!
This first one is a pop up of sorts. The 2 sides have tabs that pop up when open.
HC PRODUCTS USED
HCD2-7309 Elaborate Oval Frames
HCDP1-2113 Wild Rose Paper Collection
HCD1-7293 French Cottage’scapes Die
HCPC-3909 French Cottage’scapes Stamp Set
HCD1-7289 Small Wild Rose Die
HCPC-3906 Small Wild Rose Stamp Set
HCFB1-486 Small 3D Wild Rose Shaping Mold
HCD1-7193 Leafy Accents Die
HCPC-3835 Leafy Accents Stamp Set
HCFB1-467 3DLeafy Accents Shaping Mold
HCPC-3846 Thank You Sentiments Stamp Set
HCS1-458-1 Bright Pearl Stamens-Small
HCS1-458-2 Bright Pearl Stamens-Medium
352854 Metal Tip for Adhesive Bottles
159723 Dries Clear Adhesive
85-glitter Crystal UltrafineTransparent Glitter
RACP436 Leaf Green Archival Ink
RACP962 Fern Green Archival Ink
RACP614 Magenta Hue Archival Ink
RACP632 Buttercup Archival Ink
HCPP1-475 Deluxe Flower Shaping Paper Pack of 50-White
3D1844 3-D Crystal Lacquer
Other Products:
White cardstock, London Fog Memento Ink,
Copics: C1, C2, C3 RV00, RV10, RV02, YG11,
YG41
For more tips on creating with the flower shaping molds,
watch the tutorial at
https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: 4 3/4 X 4 1/4”.
Start with a piece of white cardstock 5 X 8
1/2", cut top of cardstock with die to die halfway point.
Turn cardstock around and cut again just to
halfway point on die (there will be 1 1/2" straight edge between top and
bottom, trim to be even with end of die cut).
Make the same cut from green decorative paper then glue to card base.
Score and fold in half.
Make a slit 3/4" in from edge on both
sides of straight center and cut 3/4" up from center and 3/4" down
from center to make a 1 1/2” slit, scored in the center.
Score again at the top and bottom from slit
to edge.
Card will be a valley fold but
tabs created will be mountain fold, this is the pop up.
(Optional) Fold another piece of white
cardstock 4 3/4
X 7 3/4" Cut top
half of die again but leave die top edge off the fold.
Glue to the back of card top, for a personal
message.
Stamp pots
using London Fog and color. Stamp
Flowers and sentiment with Magenta Hue, sponge flowers with Magenta and
Buttercup. Die cut sentiment with Elaborate
die oval and die cut flowers, shape in the mold (see video). Stamp leaves with
Fern Green sponge with Leaf Green, die cut and shape. Glue flowers together in sets of 2, insert small
and medium stamen.
Use the inner part of the Elaborate die to cut 2 Decorative
paper shapes and to cut 2 white mats.
Also cut the whole decorative die from white then cut it in half.
Glue one half to top and one to bottom, trim
on both sides where the score is to just meet score.
Cut white mats to fit and then cut decorative
paper to fit, glue to card top and bottom.
Glue pots to pop ups, card can fold down
still.
Pop oval sentiment to bottom
half.
Glue leaves and flowers to bottom
left.
(You can still fold down but the
flowers make it so that it doesn’t fold flat).
Glitter the card and the flowers.
My second card
HC PRODUCTS USED
HCD2-7306 Decorative Circle Frames Die
HCD1-7155 Circle Basics Large Die
HCD1-7154 Eyelet Circle & Basics Small Die
HCDP1-2112 Tea Time Paper Collection
HCPC-3855 Floral Fashionista Stamp Set
HCD1-7215 Floral Fashionista Die
HCFB1-471 3D Petite Florals Shaping Mold
HCD1-7289 Small Wild Rose Die
HCPC-3906 Small Wild Rose Stamp Set
HCFB1-486 Small 3D Wild Rose Shaping Mold
HCD1-7193 Leafy Accents Die
HCPC-3835 Leafy Accents Stamp Set
HCFB1-467 3D Leafy Accents Shaping Mold
HCPC-3846 Thank You Sentiments Stamp Set
HCS1-458-1 Bright Pearl Stamens-Small
HCS1-458-3 Bright Bead Stamens-Medium
352854 Metal Tip for Adhesive Bottles
159723 Dries Clear Adhesive
85-glitter Crystal UltrafineTransparent Glitter
RACP436 Leaf Green Archival Ink
RACP962 Fern Green Archival Ink
RACP614 Magenta Hue Archival Ink
RACP632 Buttercup Archival Ink
HCPP1-475 Deluxe Flower Shaping PaperPack of 50-White
HCGP1-488 Luxe Gold Cardstock
3D1844 3-D Crystal Lacquer
Other Products:
White cardstock, Fun Foam
For more tips on creating with the flower shaping molds,
watch the tutorial at
https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: 4 3/4 X 6 3/4".
Start with 6 3/4 X 8 1/2" piece of white,
fold to 6 3/4 X 4 1/4" and place die about 1/2" up past fold so that fold
does not get cut.
Cut with the die again
on another piece of white then glue it to the folded card matching bottom and
side edges.
Cut the decorative part of
the outside die out of Gold Luxe.
Glue
it to the card front.
Cut a
large circle from white and also from Fun Foam, glue these together then glue
to card center. The next layer is the
largest eyelet circle in the Decorative Circle Frames from Gold Luxe, then cut
the next size eyelet circle frame out of decorative paper from the Tea Time Collection. Glue these layers to the center of card
front.
Stamp sentiment on white then die cut with scallop circle
to fit sentiment also cut from the Eyelet Circle & Basics a gold mat plus
Fun Foam.
Glue these layers to the
center.
Stamp
flowers using Magenta Hue, die cut, sponge with Magenta and Buttercup, shape
then layer 2 for each flower and insert small and medium stamen. Stamp Petite flowers using Buttercup, sponge,
die cut and form in mold. Insert 1 medium
stamen in each. Stamp leaves with Fern
Green, sponge with Leaf Green and flower color, die cut then form in mold.
Arrange
leaves and flowers around left and right side.
Glitter flowers and decorative paper layer.
My third card today
HC PRODUCTS USED
HCD2-7307 RoyalElegance Frames
HCD1-7289 Small Wild Rose Die
HCPC-3906 Small Wild Rose Stamp Set
HCFB1-486 Small 3D Wild Rose Shaping Mold
HCD1-7293 French Cottage’scapes Die
HCPC-3909 French Cottage’scapes Stamp Set
HCD1-7193 Leafy Accents Die
HCPC-3835 Leafy Accents Stamp Set
HCFB1-467 3D Leafy Accents Shaping Mold
HCPC-3815 Words of Comfort Stamp Set
HCDP1-2113 Wild Rose Paper Collection
HCS1-458-1 Bright Pearl Stamens-Small
HCS1-458-2 Bright Pearl Stamens-Medium
352854 Metal Tip for AdhesiveBottles
159723 Dries Clear Adhesive
85-glitter Crystal UltrafineTransparent Glitter
RACP436 Leaf Green Archival Ink
RACP962 Fern Green Archival Ink
RACP614 Magenta Hue Archival Ink
RACP632 Buttercup Archival Ink
TSMP704 New Sprout Memento Ink
RACP412 Forget Me Not Archival Ink
HCPP1-475 Deluxe Flower Shaping Paper Pack of 50-White
3D1844 3-D Crystal Lacquer
Other Products:
White cardstock, Fun Foam, Shimmer additive
For more tips on creating with the flower shaping molds,
watch the tutorial at
https://youtu.be/FSdPL7nXvQE
Instructions:
Card size:
4 3/4 X
6 3/4". Start with 12 X 5” white then fold in half to make 6 X 5.
Place die on folded card off the fold about 1”.
On another piece of white, cut with same die to
make a full cut.
Glue the full die cut
onto folded card base matching sides and bottom.
Cut a pink decorative paper full cut then
glue to front of card.
Die cut
the largest decorative die plus the next 2 in the set out of white. Cut the oval out of Fun Foam twice as well. Glue 1 foam oval to the decorative second die
and 1 to the oval. Glue the largest
white to the card then glue the foam with decorative die to the center, last Stamp
sentiment using Magenta Hue and glue that layer with foam to the center.
Stamp all the Wild Rose and French Cottage flowers with
Magenta, sponge with Magenta and Buttercup and stamp 1 small set of Wild Rose
with New Sprout, sponge middle with Forget Me Not. Stamp leaves with Fern
Green, sponge with Leaf Green and flower color.
Die cut all, form in molds.
Insert small and medium stamen in all the
Wild Roses.
Glue Prills to French
Cottage Flowers.
Arrange
leaves and flowers around left side of card then glitter all flowers and card. Add shimmer additive to some Crystal Lacquer
and brush onto leaves.
Thanks for visiting today!
Robin
Psalms91:15
When they call on me, I will answer;
I will be with them in trouble.
I will rescue and honor them.
3 comments:
Three absolutely gorgeous cards Robin! Love how you've used the dies!
I just love your cards Robin! You are so talented! Hugs
These cards are just so gorgeous!! I love the colours of your flowers!!
Post a Comment