Pages

Comments are welcome and very much appreciated!

Tuesday, February 4, 2020

HC One In A Million Shaped Card

Good morning!
Another shaped card, aren't those fun! I love doing different 
shaped cards.
HC PRODUCTS USED      
HCD1-7279     FreshCut Hydrangea Die
HCD1-7280    Cottage Window & Hydrangea Die
HCPC-3901     FreshCut Hydrangea Stamp Set
HCPC-3902    Cottage Window & Hydrangea Stamp Set
HCDP1-2111  Cottage Garden Paper Collection
HCD1-7263     Swirly Accent Spray Die
HCD1-7161     Sweetheart Borders Die
HCD1-7156    Eyelet Oval & Basics Small Die
RACP430        Deep Purple Archival Ink
TSMP900       Tuxedo Black
PGM15015     RajniChawla’s Crystal Clear
85-glitter        Crystal Ultrafine Transparent Glitter
352854           Metal Tip for Adhesive
159723           Dries Clear Adhesive

Other Products:
White cardstock, Foam tape, Copic Markers: G82, G21, B60, B63, BV31, E50, RV11, Y21, YR24, E33, E35, E37, C2, C3, C5, BV00, BV02, BV13

https://youtu.be/kJO5LdNFxgE
Instructions:
Card size: 5 3/4 X 6”.   Start with a 6 X 6” folded white card.  Use the outer edge of the smaller decorative die in the Swirly Accent Spray Die set.  Cut one side then the other.  Place decorative paper under the cut out card an line up the die on the paper then cut.  Do the same for the other side.  Glue the decorative paper to the card front.  Cut 2 decorative dies from white cardstock then glue them to the 2 sides.  Cut one Sweetheart Border from white and cut enough to fit top and bottom of card.

Stamp the window, upper and lower hydrangea border flowers and the birds with hydrangeas using black ink, die cut then color with Copics.  Cut a backer for the window from a coordinating decorative paper (don’t use the inner part of the window die so that you get one solid piece).  Glue it to the back of the open window.  Glue the window down to approximate center of card leaving shutters free.  Foam tape and glue the upper and lower hydrangeas to the window.  Foam tape the birds with hydrangeas on top of the lower border of hydrangeas.

Stamp the sentiment using Deep Purple onto a piece of coordinating decorative paper then sponge the edges with purple and glue to the top of card.

Randomly glitter card all over with fine glitter.  Glitter flowers with Rajni’s Crystal Clear.
My second card is a shaped card done with the Booklet Frames
and Booklet Basics

HC PRODUCTS USED      
HCFB1-464             3D Floral Basic Shaping Mold
HCD1-7140             Large Classic Petunia Die
HCD1-7139             Small Classic Petunia Die
HCPC-3786             Large Classic Petunia Stamp Set
HCPC-3785              Small Classic Petunia Stamp Set
HCFB1-467              3D Leafy Accents Shaping Mold
HCPC-3835             Leafy Accents Stamp Set
HCD1-7193             Leafy Accents Die
HCD2-7261             Booklet Frames Die
HCD1-7260             Booklet Basics Die
HCPC-3814             Words Of Encouragement Stamp Set
HCDP12102            Purr-fect Posies Paper Collection
HCPP1-475              Deluxe Flower Shaping Paper Pack of 50-White
HCS1-459-4            Rock Candy Stamen-Small
HCS1-459-3            Assorted Bead Stamen-Medium
352854                    Metal Tip for Adhesive
159723                    Dries Clear Adhesive
3D1844                    3-D Crystal Lacquer
85 glitter                   Crystal UltrafineTransparent Glitter
PGM15015              Rajni Chawla’s Crystal Clear
Racp436                  Leaf Green Archival Ink
RACP962                 Fern Green Archival Ink
RACP614                 Magenta Hue Archival Ink
RACP412                 Forget Me Not Archival Ink
TSMP900                 Tuxedo Black Memento Ink


Other Products:
Silver cardstock, White cardstock, foam tape, Silver Leaf Pen, Sheer blue ribbon, Copics: YG03, YG17, BG02, BG00, RV52

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
For more tips on creating with the booklet frame dies, watch the tutorial at https://youtu.be/kJO5LdNFxgE.
For tips on making shaped card Booklet:
https://www.heartfeltcreations.us/gallery/dreamy-blossoms-booklet
Instructions:
Card size: 4 3/4 X 6 7/8”.  Fold 6 X 8” white cardstock and place the largest Booklet Basic onto folded card with about 1/2" hanging off the top so that fold stays intact (see video).  Cut another white full Booklet.  Cut the largest Booklet Frame and book marker from Silver.  Cut 1 size smaller Booklet from decorative paper.  Use the Silver Leaf Pen on the Large and smaller Booklet Basic (don’t use it on the card base as it will not show). 

Stamp the sentiment using Magenta Hue, on the right side of book (make sure book is right side up).  Now glue the silver frame to the card base making sure to line up the solid part of frame with the base.  Glue the white card front to the frame then glue the decorative page with sentiment to the front, centering.  Glue the book marker at the top.

Stamp the large and small petunias using Forget Me Not, sponge with the same and with Magenta, die cut and form in the Shaping Mold (see video).  While still moist squeeze petals between your fingers in a pleating motion.  Allow all blossoms to dry completely (they will become nice and stiff so that they keep their shape).  Punch each in the center and layer at least 2 of the same size together for each flower.  Pierce the centers and insert the stamen, rock candy first then insert 1 medium beaded. 

Stamp leaves using Fern Green, sponge with Leaf Green, die cut, shape in mold then gloss with Lacquer.  Stamp petunia border using black, die cut and color with Copics.  Glue leaves and flowers to bottom and up left side.  Glue part of the border to right side of book page.  Glitter all the flowers and randomly glitter card.

Cut pieces of blue ribbon, angle the ends, fold in half and insert in between some flowers, and at both ends of flower spray.
My third card is made with the Classic Petunia 



HC PRODUCTS USED      
HCFB1-464             3D Floral Basic Shaping Mold
HCD1-7140             Large Classic Petunia Die
HCD1-7139             Small Classic Petunia Die
HCPC-3786             Large Classic Petunia Stamp Set
HCPC-3785             Small Classic Petunia Stamp Set
HCFB1-467              3D Leafy Accents Shaping Mold
HCPC-3835             Leafy Accents Stamp Set
HCD1-7193             Leafy Accents Die
HCD2-7212             Petite Pocket Accents  Die
HCD1-7211             Decorative Pocket Accents Die
HCD1-7271             Rounded Window Frame Die
HCD1-7155             Circle Basics Large Die
HCD1-7201             Ticket and Tags Die
HCD1-7258             Wild Aster Spray Die
HCPC-3888              Wild Aster Spray Stamp Set
HCDP1-2106           Wild Aster Paper Collection
HCPP1-475              Deluxe Flower Shaping Paper Pack of 50-White
RACP614                  Magenta Hue Archival Ink
RACP632                 Buttercup Archival Ink
TSBL34                      Pearlescent Orchid BrillianceInk
352854                    Metal Tip for Adhesive
159723                    Dries Clear Adhesive
3D1844                    3-D Crystal Lacquer
85 glitter                   Crystal UltrafineTransparent Glitter
PGM15015              Rajni Chawla’s Crystal Clear
Racp436                  Leaf Green Archival Ink
RACP962                 Fern Green Archival Ink
HCS1-459-4            Rock Candy Stamen-Small
ANC803                   Minnie Pearl Prills

Other Products:
White cardstock, alcohol ink-yellow for dying stamen, foam tape

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE
Instructions:
Card size: 5 3/4 X 6 1/4".   Cut cardstock 6 1/4 X 11 1/2", fold and lay outside edge of Petit Pocket Accent on top and cut front and back together, (the fold is on the side).  Cut 1 Petite Pocket accent wide and narrow from white, Cut 1 Decorative Pocket Accent the center of the Rounded Window Frame and the 2 1/2" circle from white as well.  Cut a piece of decorative paper 5 5/8 X 6 1/8.  Cut the top to match the card base then glue to the card base.  Glue the Petite narrow die to the wide Petite die then glue the set to the top of the card.  Glue the Decorative Pocket Accent to the bottom after cutting off the slot.  Glue the white circle and the center of the Rounded Window Frame to the center of the card.

Stamp the 2 sentiments from the Petunia set onto white using Pearlescent Orchid then die cut with the Tickets and Tags.  Stamp the small petunia set using Magenta Hue, sponge with Buttercup and Orchid, die cut, sponge the backs then form in the Shaping Mold (see video).  Give the petals and extra squeeze between fingers.  Layer 2 of the same size for each flower and add a green base.  Use alcohol ink to dye the white Rock Candy Stamen to yellow, pierce centers of flowers then insert the stamen.  

Stamp leaves using Fern Green, sponge with Leaf Green and Magenta Hue, die cut then form in the Shaping Mold.  Stamp Wild Aster Spray using Buttercup, die cut then dot with glue and add white Prills.

Arrange leaves and flowers around the bottom and left side of the center circle.  Add the Wild Aster Spray pieces where needed and to each end.  Glitter all the flowers and gloss all the leaves with Lacquer.  Randomly glitter card front.  Curl the strip sentiment after cutting ends to a fishtail.  Tuck ticket Happy Birthday in with flowers on top then tuck the Let’s Celebrate curled strip underneath.

Thanks for visiting today!
Robin

Psalm 59:16 New King James Version (NKJV)

16 But I will sing of Your power;
Yes, I will sing aloud of Your mercy in the morning;
For You have been my defense
And refuge in the day of my trouble.

2 comments:

Unknown said...

I love your card it is so pretty. How do I print a picture of the card and the instructions please?Some people have print on there pages. The one I like is the Booklet one. Thank you.

Patricia Manhire said...

Gorgeous cards! Love your colouring and the flowers are stunning!!